Содержание

Создание собственного пакета Chocolatey

Экспорт в PDF Преобразовать страницу в формат Open Document

Дата создания: 2024/08/19 14:06 (C) mihanik

Дано

Вышла новая платформа 1с.

Рассмотрим пример публикации платформы 1С на собственном сервере Chocolatey
Для определённости пусть версия платформы будет 8.3.24.1667

Надо

Добавить версию платформы 1С на свой сервер Chocolatey чтобы в дальнейшем можно было быстро развернуть его на компьютерах пользователей.

Важно!!!

Chocolatey старается устанавливать на ПК программный пакет именно той разрядности, что и разрядность системы.

Для 1С это не всегда хорошо, т.к. если на ПК используются эквайринговые системы и некоторые другие «плюшки», работа с кассами и некоторым другим оборудованием может быть нарушена.

Мы используем обходной манёвр: «скажем» Chocolatey, что 32-хразрядная платформа отлично работает на Windows любой разрядности. LOL

Решение

Шаг 1

С сайта https://releases.1c.ru/total скачиваем архив с дистрибутивом программы.

Шаг 2

Скачанный RAR-архив с дистрибутивом распаковываем в какую-нибудь папку, а затем опять упаковываем в ZIP-архив с именем setup.zip

С RAR-архивами Chocolatey не умеет работать «из коробки».
Можно, конечно, и пропустить этот шаг, но тогда усложнится реализация алгоритма установки.
В работе я обычно использую архиватор 7Zip

Шаг 3

Получившийся архив setup.zip размещаем на своём сервере

Важно!!!
Обязательно получите контрольную сумму архива.
Это пригодится при дальнейшей настройке!

Для вычисления контрольной суммы запускаем PowerShell и подаём несложную команду.
Например, такую.

Get-FileHash C:\tools\chocolatey.server\distr\1c\x32\8.3.24.1667\setup.zip  -Algorithm SHA256
Можно получить контрольную сумму с использованием разных алгоритмов.

Шаг 4

Теперь открываем командную строку и переходим в «песочницу», где мы «играем» с пакетами Chocolatey.

Шаг 5

Создаём шаблон для нового релиза платформы 1С.

choco new 1c --version=8.3.24.1667 --maintainer=mihanikus --force

Шаг 6

Теперь файл 1c.nuspec приводим к следующему виду.

В моём случае имя файла оказалось таким: C:\tools\sandbox\1c\1c.nuspec
<?xml version="1.0" encoding="utf-8"?>
<!-- Read this before creating packages: https://docs.chocolatey.org/en-us/create/create-packages -->
<!-- It is especially important to read the above link to understand additional requirements when publishing packages to the community feed aka dot org (https://community.chocolatey.org/packages). -->

<!-- Test your packages in a test environment: https://github.com/chocolatey/chocolatey-test-environment -->

<!--
This is a nuspec. It mostly adheres to https://docs.nuget.org/create/Nuspec-Reference. Chocolatey uses a special version of NuGet.Core that allows us to do more than was initially possible. As such there are certain things to be aware of:

* the package xmlns schema url may cause issues with nuget.exe
* Any of the following elements can ONLY be used by choco tools - projectSourceUrl, docsUrl, mailingListUrl, bugTrackerUrl, packageSourceUrl, provides, conflicts, replaces
* nuget.exe can still install packages with those elements but they are ignored. Any authoring tools or commands will error on those elements
-->

<!-- You can embed software files directly into packages, as long as you are not bound by distribution rights. -->
<!-- * If you are an organization making private packages, you probably have no issues here -->
<!-- * If you are releasing to the community feed, you need to consider distribution rights. -->
<!-- Do not remove this test for UTF-8: if “Ω” doesn’t appear as greek uppercase omega letter enclosed in quotation marks, you should use an editor that supports UTF-8, not this one. -->
<package xmlns="http://schemas.microsoft.com/packaging/2015/06/nuspec.xsd">
  <metadata>
    <!-- == PACKAGE SPECIFIC SECTION == -->
    <!-- This section is about this package, although id and version have ties back to the software -->
    <!-- id is lowercase and if you want a good separator for words, use '-', not '.'. Dots are only acceptable as suffixes for certain types of packages, e.g. .install, .portable, .extension, .template -->
    <!-- If the software is cross-platform, attempt to use the same id as the debian/rpm package(s) if possible. -->
    <id>1c</id>
    <!-- version should MATCH as closely as possible with the underlying software -->
    <!-- Is the version a prerelease of a version? https://docs.nuget.org/create/versioning#creating-prerelease-packages -->
    <!-- Note that unstable versions like 0.0.1 can be considered a released version, but it's possible that one can release a 0.0.1-beta before you release a 0.0.1 version. If the version number is final, that is considered a released version and not a prerelease. -->
    <version>8.3.24.1667</version>
    <!-- <packageSourceUrl>Where is this Chocolatey package located (think GitHub)? packageSourceUrl is highly recommended for the community feed</packageSourceUrl>-->
    <!-- owners is a poor name for maintainers of the package. It sticks around by this name for compatibility reasons. It basically means you. -->
    <!--<owners>mihanikus</owners>-->
    <!-- ============================== -->

    <!-- == SOFTWARE SPECIFIC SECTION == -->
    <!-- This section is about the software itself -->
    <title>1c (Install)</title>
    <authors>1C</authors>
    <!-- projectUrl is required for the community feed -->
    <projectUrl>https://1c.ru</projectUrl>
    <!-- There are a number of CDN Services that can be used for hosting the Icon for a package. More information can be found here: https://docs.chocolatey.org/en-us/create/create-packages#package-icon-guidelines -->
    <!-- Here is an example using Githack -->
    <!--<iconUrl>http://rawcdn.githack.com/__REPLACE_YOUR_REPO__/master/icons/1c.png</iconUrl>-->
    <!-- <copyright>Year Software Vendor</copyright> -->
    <!-- If there is a license Url available, it is required for the community feed -->
    <!-- <licenseUrl>Software License Location __REMOVE_OR_FILL_OUT__</licenseUrl>
    <requireLicenseAcceptance>true</requireLicenseAcceptance>-->
    <!--<projectSourceUrl>Software Source Location - is the software FOSS somewhere? Link to it with this</projectSourceUrl>-->
    <!--<docsUrl>At what url are the software docs located?</docsUrl>-->
    <!--<mailingListUrl></mailingListUrl>-->
    <!--<bugTrackerUrl></bugTrackerUrl>-->
    <tags>1c 1cx32</tags>
    <summary></summary>
    <description>Установка платформы 1с через choco</description>
    <!-- <releaseNotes>__REPLACE_OR_REMOVE__MarkDown_Okay</releaseNotes> -->
    <!-- =============================== -->

    <!-- Specifying dependencies and version ranges? https://docs.nuget.org/create/versioning#specifying-version-ranges-in-.nuspec-files -->
    <!--<dependencies>
      <dependency id="" version="__MINIMUM_VERSION__" />
      <dependency id="" version="[__EXACT_VERSION__]" />
      <dependency id="" version="[_MIN_VERSION_INCLUSIVE, MAX_VERSION_INCLUSIVE]" />
      <dependency id="" version="[_MIN_VERSION_INCLUSIVE, MAX_VERSION_EXCLUSIVE)" />
      <dependency id="" />
      <dependency id="chocolatey-core.extension" version="1.1.0" />
    </dependencies>-->
    <!-- chocolatey-core.extension - https://community.chocolatey.org/packages/chocolatey-core.extension -->

    <!--<provides>NOT YET IMPLEMENTED</provides>-->
    <!--<conflicts>NOT YET IMPLEMENTED</conflicts>-->
    <!--<replaces>NOT YET IMPLEMENTED</replaces>-->
  </metadata>
  <files>
    <!-- this section controls what actually gets packaged into the Chocolatey package -->
    <file src="tools\**" target="tools" />
  </files>
</package>

Собственно говоря, указываем некоторые данные. Остальное можно не трогать.

<id>1c</id>
...
<version>8.3.24.1667</version>
...
<title>1c (Install)</title>
...
<projectUrl>https://1c.ru</projectUrl>
...
<tags>1c 1cx32</tags>
...
<description>Установка платформы 1с через choco</description>

Этого будет достаточно.

Шаг 7

Теперь настраиваем алгоритм установки 1С

Алгоритм будет состоять из 2-х частей:

В моём случае алгоритм установки находится в файле с именем
C:\tools\sandbox\1c\tools\chocolateyinstall.ps1

Файл chocolateyinstall.ps1 привожу к следующему виду

$ErrorActionPreference = 'Stop' # stop on all errors
$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
 
$packageZipArgs  = @{
  packageName    = $env:ChocolateyPackageName
  unzipLocation  = $toolsDir
  Url            = 'http://choco.mihanik.net/distr/1c/x32/8.3.24.1667/setup.zip'
  Checksum       = '42654E8A9F8C50156F9C38B785687F2B378D3CE51741ABB58422B95B06249F26'
  ChecksumType   = 'SHA256'
  Url64          = 'http://choco.mihanik.net/distr/1c/x32/8.3.24.1667/setup.zip'
  Checksum64     = '42654E8A9F8C50156F9C38B785687F2B378D3CE51741ABB58422B95B06249F26'
  ChecksumType64 = 'SHA256'
  softwareName  = '1C*'
  validExitCodes = @(0, 3010, 1641)
}
 
$packageArgs = @{
  packageName   = $env:ChocolateyPackageName
  file 			= $toolsDir + '\1CEnterprise 8.msi'
  file64		= $toolsDir + '\1CEnterprise 8.msi'
  fileType      = 'MSI'
  silentArgs    = '/qn TRANSFORMS=adminstallrelogon.mst;1049.mst DESIGNERALLCLIENTS=1 THICKCLIENT=1 THINCLIENTFILE=1 THINCLIENT=1 WEBSERVEREXT=1 SERVER=0 CONFREPOSSERVER=0 CONVERTER77=0 SERVERCLIENT=1 LANGUAGES=RU'
  validExitCodes= @(0, 3010, 1641)
  softwareName  = '1C*'
}
 
Write-Output "Установка 1с."
 
Write-Output "Скачиваем архив с программой."
 
Install-ChocolateyZipPackage @packageZipArgs
 
Write-Output "Устанавливаем платформу."
 
Install-ChocolateyInstallPackage @packageArgs

Шаг 8

Настраиваем алгоритм удаления нашей платформы. Для этого редактируем файл chocolateyuninstall.ps1.

В моём случае файл имеет имя
C:\tools\sandbox\1c\tools\chocolateyuninstall.ps1

Файл chocolateyuninstall.ps1 привожу к следующему виду

# IMPORTANT: Before releasing this package, copy/paste the next 2 lines into PowerShell to remove all comments from this file:
#   $f='c:\path\to\thisFile.ps1'
#   gc $f | ? {$_ -notmatch "^\s*#"} | % {$_ -replace '(^.*?)\s*?[^``]#.*','$1'} | Out-File $f+".~" -en utf8; mv -fo $f+".~" $f

## NOTE: In 80-90% of the cases (95% with licensed versions due to Package Synchronizer and other enhancements),
## AutoUninstaller should be able to detect and handle registry uninstalls without a chocolateyUninstall.ps1.
## See https://docs.chocolatey.org/en-us/choco/commands/uninstall
## and https://docs.chocolatey.org/en-us/create/functions/uninstall-chocolateypackage

## If this is an MSI, ensure 'softwareName' is appropriate, then clean up comments and you are done.
## If this is an exe, change fileType, silentArgs, and validExitCodes

$ErrorActionPreference = 'Stop' # stop on all errors
$packageArgs = @{
  packageName   = $env:ChocolateyPackageName
  softwareName  = '1c*'  #part or all of the Display Name as you see it in Programs and Features. It should be enough to be unique
  fileType      = 'MSI' #only one of these: MSI or EXE (ignore MSU for now)
  # MSI
  silentArgs    = "/qn /norestart"
  validExitCodes= @(0, 3010, 1605, 1614, 1641) # https://msdn.microsoft.com/en-us/library/aa376931(v=vs.85).aspx
  # OTHERS
  # Uncomment matching EXE type (sorted by most to least common)
  #silentArgs   = '/S'           # NSIS
  #silentArgs   = '/VERYSILENT /SUPPRESSMSGBOXES /NORESTART /SP-' # Inno Setup
  #silentArgs   = '/s'           # InstallShield
  #silentArgs   = '/s /v"/qn"'   # InstallShield with MSI
  #silentArgs   = '/s'           # Wise InstallMaster
  #silentArgs   = '-s'           # Squirrel
  #silentArgs   = '-q'           # Install4j
  #silentArgs   = '-s -u'        # Ghost
  # Note that some installers, in addition to the silentArgs above, may also need assistance of AHK to achieve silence.
  #silentArgs   = ''             # none; make silent with input macro script like AutoHotKey (AHK)
                                 #       https://community.chocolatey.org/packages/autohotkey.portable
  #validExitCodes= @(0) #please insert other valid exit codes here
}

[array]$key = Get-UninstallRegistryKey -SoftwareName $packageArgs['softwareName']

if ($key.Count -eq 1) {
  $key | % {
    $packageArgs['file'] = "$($_.UninstallString)" #NOTE: You may need to split this if it contains spaces, see below

    if ($packageArgs['fileType'] -eq 'MSI') {
      # The Product Code GUID is all that should be passed for MSI, and very
      # FIRST, because it comes directly after /x, which is already set in the
      # Uninstall-ChocolateyPackage msiargs (facepalm).
      $packageArgs['silentArgs'] = "$($_.PSChildName) $($packageArgs['silentArgs'])"

      # Don't pass anything for file, it is ignored for msi (facepalm number 2)
      # Alternatively if you need to pass a path to an msi, determine that and
      # use it instead of the above in silentArgs, still very first
      $packageArgs['file'] = ''
    } else {
      # NOTES:
      # - You probably will need to sanitize $packageArgs['file'] as it comes from the registry and could be in a variety of fun but unusable formats
      # - Split args from exe in $packageArgs['file'] and pass those args through $packageArgs['silentArgs'] or ignore them
      # - Ensure you don't pass double quotes in $file (aka $packageArgs['file']) - otherwise you will get "Illegal characters in path when you attempt to run this"
      # - Review the code for auto-uninstaller for all of the fun things it does in sanitizing - https://github.com/chocolatey/choco/blob/bfe351b7d10c798014efe4bfbb100b171db25099/src/chocolatey/infrastructure.app/services/AutomaticUninstallerService.cs#L142-L192
    }

    Uninstall-ChocolateyPackage @packageArgs
  }
} elseif ($key.Count -eq 0) {
  Write-Warning "$packageName has already been uninstalled by other means."
} elseif ($key.Count -gt 1) {
  Write-Warning "$($key.Count) matches found!"
  Write-Warning "To prevent accidental data loss, no programs will be uninstalled."
  Write-Warning "Please alert package maintainer the following keys were matched:"
  $key | % {Write-Warning "- $($_.DisplayName)"}
}

## OTHER POWERSHELL FUNCTIONS
## https://docs.chocolatey.org/en-us/create/functions
#Uninstall-ChocolateyZipPackage $packageName # Only necessary if you did not unpack to package directory - see https://docs.chocolatey.org/en-us/create/functions/uninstall-chocolateyzippackage
#Uninstall-ChocolateyEnvironmentVariable - https://docs.chocolatey.org/en-us/create/functions/uninstall-chocolateyenvironmentvariable
#Uninstall-BinFile # Only needed if you used Install-BinFile - see https://docs.chocolatey.org/en-us/create/functions/uninstall-binfile
## Remove any shortcuts you added in the install script.

Собственно говоря, я тут отредактировал только одну строчку.

  fileType      = 'MSI' #only one of these: MSI or EXE (ignore MSU for now)

Шаг 9

Теперь можем проверить правильность настройки нашего пакета.

Сначала упаковываем наш пакет командой

choco pack C:\tools\sandbox\1c\1c.nuspec

А потом пробуем его установить

choco install 1c  --version="8.3.24.1667" --source="C:\tools\sandbox\1c" -y

Как видим, всё проходит успешно

Шаг 10

А теперь можем отправить наш пакет на сервер Chocolatey

choco push C:\tools\sandbox\1c\1c.8.3.24.1667.nupkg --source=http://choco.mihanik.net/chocolatey --apikey="бла-бла-бла" --force

Шаг 11

Теперь смело можем устанавливать нашу платформу на ПК пользователей командой

choco install 1c  --version="8.3.24.1667" -y

Источники

⇑ Наверх ⇑

В моей WIKI постоянно ведётся какая-то работа со статьями.
Если у вас возникли вопросы или замечания,
можете их отправлять на почту support@mihanik.net